Delft3DWAVE output error  Coast/Estuary  Delft3D
intro story Coast / Estuary
Coast / EstuaryCoastal systems are among the most dynamic physical systems on earth and are subject to a large variety of forces. The morphodynamic changes occurring to coastlines worldwide are of great interest and importance. These changes occur as a result of the erosion of sediments, its subsequent transport as bed load or suspended load, and eventual deposition. Estuaries are partly enclosed water bodies that have an open connection to the coast. Estuaries generally have one or more branching channels, intertidal mudflats and/or salt marshes. Intertidal areas are of high ecological importance and trap sediments (sands, silts, clays and organic matter). Within the Delft3D modelling package a large variation of coastal and estuarine physical and chemical processes can be simulated. These include waves, tidal propagation, wind or waveinduced water level setup, flow induced by salinity or temperature gradients, sand and mud transport, water quality and changing bathymetry (morphology). Delft3D can also be used operationally e.g. storm, surge and algal bloom forecasting. On this discussion page you can post questions, research discussions or just share your experience about modelling coastal and/or estuarine systems with Delft3D FM. ** PLEASE TAG YOUR POST! **  Sub groups

Message Boards
Delft3DWAVE output error
ZF
Zhixuan Feng, modified 8 Years ago.
Delft3DWAVE output error
Youngling Posts: 5 Join Date: 10/21/11 Recent Posts 00
Greeting, Deltares community!
This is Zhixuan from University of Miami. I am a new user of Delft3D open source and get into some sorts of problem at this moment. Can somebody help me with it? Thanks!
I am trying to set up a coupled flowwave model for Biscayne Bay (Miami, USA). Before testing coupling, I first tried to run flow and wave, separately. The flow run succeeded.
When I was running the standalone wave, the problem seems to me that the model couldn't generate output files.
Here I attached the text
Starting Delft3DWAVE computation ...

 Delft3D
 Deltares, Delft3DWAVE Version 3.04.00.00000, Feb 03 2011, 12:12:28
 Open source


*** MESSAGE: Delft3DWAVE runs stand alone
Done reading input
Initialising grids and grid mappings
Reading conditions from wavecon file
0.00 0.89 7.45 97.50 10.00 0.00 92.00 9.20
Start loop over SWAN grids, time = 0.000
Allocate input fields
Allocate and read SWAN depth
Write SWAN depth file
Deallocate input fields
Write SWAN input
*** MESSAGE: 'hobiewave201101' is truncated to 'hobiewav' in SWAN input file
<<Run SWAN...
SWAN batchfile executed for Delft3D
Using C:\Delft3D\w32\lib\swan.bat
Using C:\Delft3D\w32\wave\bin\swan_4072ABCDE_del_w32_i11_omp.exe
Performing wave computation for: hobiewave201101.swn
1 file(s) copied.
SWAN is preparing computation
Number of threads during execution of parallel region = 4
iteration 1; sweep 1
+iteration 1; sweep 2
+iteration 1; sweep 3
+iteration 1; sweep 4
accuracy OK in 0.96 % of wet grid points ( 98.00 % required)
iteration 2; sweep 1
+iteration 2; sweep 2
+iteration 2; sweep 3
+iteration 2; sweep 4
accuracy OK in 54.41 % of wet grid points ( 98.00 % required)
iteration 3; sweep 1
+iteration 3; sweep 2
+iteration 3; sweep 3
+iteration 3; sweep 4
accuracy OK in 73.17 % of wet grid points ( 98.00 % required)
iteration 4; sweep 1
+iteration 4; sweep 2
+iteration 4; sweep 3
+iteration 4; sweep 4
accuracy OK in 81.79 % of wet grid points ( 98.00 % required)
iteration 5; sweep 1
+iteration 5; sweep 2
+iteration 5; sweep 3
+iteration 5; sweep 4
accuracy OK in 82.93 % of wet grid points ( 98.00 % required)
iteration 6; sweep 1
+iteration 6; sweep 2
+iteration 6; sweep 3
+iteration 6; sweep 4
accuracy OK in 84.96 % of wet grid points ( 98.00 % required)
iteration 7; sweep 1
+iteration 7; sweep 2
+iteration 7; sweep 3
+iteration 7; sweep 4
accuracy OK in 86.90 % of wet grid points ( 98.00 % required)
iteration 8; sweep 1
+iteration 8; sweep 2
+iteration 8; sweep 3
+iteration 8; sweep 4
accuracy OK in 88.83 % of wet grid points ( 98.00 % required)
iteration 9; sweep 1
+iteration 9; sweep 2
+iteration 9; sweep 3
+iteration 9; sweep 4
accuracy OK in 90.66 % of wet grid points ( 98.00 % required)
iteration 10; sweep 1
+iteration 10; sweep 2
+iteration 10; sweep 3
+iteration 10; sweep 4
accuracy OK in 90.28 % of wet grid points ( 98.00 % required)
iteration 11; sweep 1
+iteration 11; sweep 2
+iteration 11; sweep 3
+iteration 11; sweep 4
accuracy OK in 92.99 % of wet grid points ( 98.00 % required)
iteration 12; sweep 1
+iteration 12; sweep 2
+iteration 12; sweep 3
+iteration 12; sweep 4
accuracy OK in 94.43 % of wet grid points ( 98.00 % required)
iteration 13; sweep 1
+iteration 13; sweep 2
+iteration 13; sweep 3
+iteration 13; sweep 4
accuracy OK in 95.73 % of wet grid points ( 98.00 % required)
iteration 14; sweep 1
+iteration 14; sweep 2
+iteration 14; sweep 3
+iteration 14; sweep 4
accuracy OK in 96.66 % of wet grid points ( 98.00 % required)
iteration 15; sweep 1
+iteration 15; sweep 2
+iteration 15; sweep 3
+iteration 15; sweep 4
accuracy OK in 97.13 % of wet grid points ( 98.00 % required)
+SWAN is processing output request 1
1 file(s) copied.
D:\Hobie_wave_201101>rem exit
>>...End of SWAN run
*** ERROR: file 'norm_end' expected to signal a correct SWAN calculation
forrtl: severe (170): Program Exception  stack overflow
Image PC Routine Line Source
swan_4072ABCDE_de 0056B127 Unknown Unknown Unknown
swan_4072ABCDE_de 004A97A8 _SWOUTP 383 swanout1.for
swan_4072ABCDE_de 00426F5C _SWMAIN 598 swanmain.for
swan_4072ABCDE_de 00425CAB _MAIN__ 110 swanmain.for
swan_4072ABCDE_de 00588A33 Unknown Unknown Unknown
swan_4072ABCDE_de 0056B74E Unknown Unknown Unknown
kernel32.dll 76C0339A Unknown Unknown Unknown
ntdll.dll 77BD9EF2 Unknown Unknown Unknown
ntdll.dll 77BD9EC5 Unknown Unknown Unknown
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
What does this error mean?
ERROR: file 'norm_end' expected to signal a correct SWAN calculation
I also attached mdw file for your convenience.
Thanks very much again~
Best~ Zhixuan
This is Zhixuan from University of Miami. I am a new user of Delft3D open source and get into some sorts of problem at this moment. Can somebody help me with it? Thanks!
I am trying to set up a coupled flowwave model for Biscayne Bay (Miami, USA). Before testing coupling, I first tried to run flow and wave, separately. The flow run succeeded.
When I was running the standalone wave, the problem seems to me that the model couldn't generate output files.
Here I attached the text
Starting Delft3DWAVE computation ...

 Delft3D
 Deltares, Delft3DWAVE Version 3.04.00.00000, Feb 03 2011, 12:12:28
 Open source


*** MESSAGE: Delft3DWAVE runs stand alone
Done reading input
Initialising grids and grid mappings
Reading conditions from wavecon file
0.00 0.89 7.45 97.50 10.00 0.00 92.00 9.20
Start loop over SWAN grids, time = 0.000
Allocate input fields
Allocate and read SWAN depth
Write SWAN depth file
Deallocate input fields
Write SWAN input
*** MESSAGE: 'hobiewave201101' is truncated to 'hobiewav' in SWAN input file
<<Run SWAN...
SWAN batchfile executed for Delft3D
Using C:\Delft3D\w32\lib\swan.bat
Using C:\Delft3D\w32\wave\bin\swan_4072ABCDE_del_w32_i11_omp.exe
Performing wave computation for: hobiewave201101.swn
1 file(s) copied.
SWAN is preparing computation
Number of threads during execution of parallel region = 4
iteration 1; sweep 1
+iteration 1; sweep 2
+iteration 1; sweep 3
+iteration 1; sweep 4
accuracy OK in 0.96 % of wet grid points ( 98.00 % required)
iteration 2; sweep 1
+iteration 2; sweep 2
+iteration 2; sweep 3
+iteration 2; sweep 4
accuracy OK in 54.41 % of wet grid points ( 98.00 % required)
iteration 3; sweep 1
+iteration 3; sweep 2
+iteration 3; sweep 3
+iteration 3; sweep 4
accuracy OK in 73.17 % of wet grid points ( 98.00 % required)
iteration 4; sweep 1
+iteration 4; sweep 2
+iteration 4; sweep 3
+iteration 4; sweep 4
accuracy OK in 81.79 % of wet grid points ( 98.00 % required)
iteration 5; sweep 1
+iteration 5; sweep 2
+iteration 5; sweep 3
+iteration 5; sweep 4
accuracy OK in 82.93 % of wet grid points ( 98.00 % required)
iteration 6; sweep 1
+iteration 6; sweep 2
+iteration 6; sweep 3
+iteration 6; sweep 4
accuracy OK in 84.96 % of wet grid points ( 98.00 % required)
iteration 7; sweep 1
+iteration 7; sweep 2
+iteration 7; sweep 3
+iteration 7; sweep 4
accuracy OK in 86.90 % of wet grid points ( 98.00 % required)
iteration 8; sweep 1
+iteration 8; sweep 2
+iteration 8; sweep 3
+iteration 8; sweep 4
accuracy OK in 88.83 % of wet grid points ( 98.00 % required)
iteration 9; sweep 1
+iteration 9; sweep 2
+iteration 9; sweep 3
+iteration 9; sweep 4
accuracy OK in 90.66 % of wet grid points ( 98.00 % required)
iteration 10; sweep 1
+iteration 10; sweep 2
+iteration 10; sweep 3
+iteration 10; sweep 4
accuracy OK in 90.28 % of wet grid points ( 98.00 % required)
iteration 11; sweep 1
+iteration 11; sweep 2
+iteration 11; sweep 3
+iteration 11; sweep 4
accuracy OK in 92.99 % of wet grid points ( 98.00 % required)
iteration 12; sweep 1
+iteration 12; sweep 2
+iteration 12; sweep 3
+iteration 12; sweep 4
accuracy OK in 94.43 % of wet grid points ( 98.00 % required)
iteration 13; sweep 1
+iteration 13; sweep 2
+iteration 13; sweep 3
+iteration 13; sweep 4
accuracy OK in 95.73 % of wet grid points ( 98.00 % required)
iteration 14; sweep 1
+iteration 14; sweep 2
+iteration 14; sweep 3
+iteration 14; sweep 4
accuracy OK in 96.66 % of wet grid points ( 98.00 % required)
iteration 15; sweep 1
+iteration 15; sweep 2
+iteration 15; sweep 3
+iteration 15; sweep 4
accuracy OK in 97.13 % of wet grid points ( 98.00 % required)
+SWAN is processing output request 1
1 file(s) copied.
D:\Hobie_wave_201101>rem exit
>>...End of SWAN run
*** ERROR: file 'norm_end' expected to signal a correct SWAN calculation
forrtl: severe (170): Program Exception  stack overflow
Image PC Routine Line Source
swan_4072ABCDE_de 0056B127 Unknown Unknown Unknown
swan_4072ABCDE_de 004A97A8 _SWOUTP 383 swanout1.for
swan_4072ABCDE_de 00426F5C _SWMAIN 598 swanmain.for
swan_4072ABCDE_de 00425CAB _MAIN__ 110 swanmain.for
swan_4072ABCDE_de 00588A33 Unknown Unknown Unknown
swan_4072ABCDE_de 0056B74E Unknown Unknown Unknown
kernel32.dll 76C0339A Unknown Unknown Unknown
ntdll.dll 77BD9EF2 Unknown Unknown Unknown
ntdll.dll 77BD9EC5 Unknown Unknown Unknown
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
What does this error mean?
ERROR: file 'norm_end' expected to signal a correct SWAN calculation
I also attached mdw file for your convenience.
Thanks very much again~
Best~ Zhixuan
Attachments:
AV
Arnold van Rooijen, modified 7 Years ago.
RE: Delft3DWAVE output error
Padawan Posts: 73 Join Date: 11/7/11 Recent Posts 00
Hi Zhixuan,
I ran into a similar problem recently. In my case it had to do with the location of the swanexecutable (similar to the problem described here). However, your error messages seem to be more related to grid size, see also here.
So, my best guess is that the amount of grid cells is too large. Could you verify that?
Cheers,
Arnold
I ran into a similar problem recently. In my case it had to do with the location of the swanexecutable (similar to the problem described here). However, your error messages seem to be more related to grid size, see also here.
So, my best guess is that the amount of grid cells is too large. Could you verify that?
Cheers,
Arnold
Qinghua Ye, modified 7 Years ago.
RE: Delft3DWAVE output error
Jedi Council Member Posts: 612 Join Date: 3/2/11 Recent Posts 00
Hi Zhixuan,
The error is stack overflow. Most probably it is because of the model grid is too much. You can either try 64 bit exes or make your grid size a bit coarser.
Regards,
Qinghua
The error is stack overflow. Most probably it is because of the model grid is too much. You can either try 64 bit exes or make your grid size a bit coarser.
Regards,
Qinghua