intro story D-Flow FM

 

D-Flow Flexible Mesh

D-Flow Flexible Mesh (D-Flow FM) is the new software engine for hydrodynamical simulations on unstructured grids in 1D-2D-3D. Together with the familiar curvilinear meshes from Delft3D 4, the unstructured grid can consist of triangles, pentagons (etc.) and 1D channel networks, all in one single mesh. It combines proven technology from the hydrodynamic engines of Delft3D 4 and SOBEK 2 and adds flexible administration, resulting in:

  • Easier 1D-2D-3D model coupling, intuitive setup of boundary conditions and meteorological forcings (amongst others).
  • More flexible 2D gridding in delta regions, river junctions, harbours, intertidal flats and more.
  • High performance by smart use of multicore architectures, and grid computing clusters.
An overview of the current developments can be found here.
 
The D-Flow FM - team would be delighted if you would participate in discussions on the generation of meshes, the specification of boundary conditions, the running of computations, and all kinds of other relevant topics. Feel free to share your smart questions and/or brilliant solutions! 

 

=======================================================
We have launched a new website (still under construction so expect continuous improvements) and a new forum dedicated to Delft3D Flexible Mesh.
Please follow this link to the new forum: 
/web/delft3dfm/forum
Post your questions, issues, suggestions, difficulties related to our Delft3D Flexible Mesh Suite on the new forum.

=======================================================

** PLEASE TAG YOUR POST! **

  

 

Sub groups
D-Flow Flexible Mesh
DELWAQ
Cohesive sediments & muddy systems

 

Message Boards

General

Categories

  • .bct

    Problems on the creation of the .bct
    0 Subcategories 3 Threads

  • Choose the best Biodegradable and Compostable Bags in Udaipur, India

    Easy Flux bags is outstanding amongst other Biodegradable and compostable Plastic Bags Manufacturers in India. We are driving <a href=” http://easy-flux.in/carry-bags/”> best Biodegradable Carry Bags in India</a>. We are delivering the bags with best raw material using natural sources. If you are searching for the best <a href=” http://easy-flux.in/bag-on-rolls/”> Biodegradable and compostable Pouches in India</a>, then your search ends here with us. We are leading best Compostable Bags Manufacturers in India, material according to the Government has on petroleum-based plastic for more than 50 microns. Easy Flux bags are produced using cornstarch and are 100% compostable and biodegradable which has demonstrated to be the best option of the typical plastic which doesn't drains even in 300 years. We are offering with <a href=” http://easy-flux.in/garbage-bags/”> Best Government Approved Garbage Bags in India</a>. We promote the eco-accommodating bags against the utilization of plastic bags.
    0 Subcategories 0 Threads

  • Compilation on Linux

    0 Subcategories 65 Threads

  • Compilation on Windows

    0 Subcategories 82 Threads

  • data science course in chennai

    Credo Systemz Provides the best Data Science  training with real time project oriented training. Our Data Science certification course is designed with the latest course syllabus from scratch.  If you are interested to learn, book your free demo session with Data Science Experts. Call us @ +91 9600112302 | 9884412301
    0 Subcategories 0 Threads

  • Devops Training

    DevOps is the combination of practices and tools designed to increase an organization's ability to deliver applications and services faster than traditional software development processes. for more information click here "https://www.acte.in/devops-training-in-pune".
    0 Subcategories 0 Threads

  • iOS Compile Problem

    Hi everyone, I am trying to compile any version of Delft3D in iOS 10.15.6 (19G2021) but every single time when I run the command "make" gives me this error: Generating version number in the ./deltares_common_version.F90 Done, new version number is: 67540M /bin/sh ../../../../../libtool --tag=FC --mode=compile mpif90 -DHAVE_CONFIG_H -I. -I../../../../.. -DWITH_DELFTONLINE -g -O2 -ffree-line-length-none -cpp -c -o deltares_common_version.lo deltares_common_version.F90 libtool: compile: mpif90 -DHAVE_CONFIG_H -I. -I../../../../.. -DWITH_DELFTONLINE -g -O2 -ffree-line-length-none -cpp -c deltares_common_version.F90 -fno-common -o .libs/deltares_common_version.o libtool: compile: mpif90 -DHAVE_CONFIG_H -I. -I../../../../.. -DWITH_DELFTONLINE -g -O2 -ffree-line-length-none -cpp -c deltares_common_version.F90 -o deltares_common_version.o >/dev/null 2>&1 /bin/sh ../../../../../libtool --tag=FC --mode=compile mpif90 -DWITH_DELFTONLINE -g -O2 -ffree-line-length-none -cpp -c -o multi_file_io.lo multi_file_io.f90 libtool: compile: mpif90 -DWITH_DELFTONLINE -g -O2 -ffree-line-length-none -cpp -c multi_file_io.f90 -fno-common -o .libs/multi_file_io.o multi_file_io.f90:79:43: 77 | res = CUTIL_MF_READ(fptr,strout,savepos) ! pass the starting position of read back to the caller | 2 78 | else 79 | res = CUTIL_MF_READ(fptr,strout,lastpos) ! disregard starting position of read | 1 Error: Type mismatch between actual argument at (1) and actual argument at (2) (INTEGER(4)/INTEGER(8)). make[8]: *** [multi_file_io.lo] Error 1 make[7]: *** [all-recursive] Error 1 make[6]: *** [all] Error 2 make[5]: *** [all-recursive] Error 1 make[4]: *** [all-recursive] Error 1 make[3]: *** [all-recursive] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Can anyone give me a light how do I solve this problem? Thanks! LP
    0 Subcategories 0 Threads

  • Lakes

    0 Subcategories 0 Threads

  • Oceanic island

    0 Subcategories 1 Thread

  • Pre & Post processing

    7 Subcategories 213 Threads

  • refine grid

    Hello: I want to refine grid like this(hand drawing is roughe): [img]https://lh3.googleusercontent.com/xh6SjhjAQecoNWCsziTtoMMAAXocpUGAp5_Lic9NZ4fC99XEdjm5aTXh4BvVO4i0bH6Wl3DqSOFQeOTh81lbGHnJeYoro7xEH0tKALhkFmKNoPT2oHV9js7_osgd4Go0xL3Gt2zzpNTavCTaz_tXdyKttCpL7oFyOYiR4BDzqOWIBZ5Lt5MgPHlB7YahXNJHH2PZ-MmwsaOVfIrg_gcIWNa71RfRKbpoD4z2is2TgcwCdQ6aQySsKS2dZyPjGg9RFCSX1ctgDUXOJBTLQuMITVbIpbypsJqtMWQrC1lIK_jYLZ9S_J3hwGr8aiqDSRvn23YZu4UmyS8S8nWhcbTQIFGCXtDw9c9euo1-1JJ6Z3J0tzYtrtLZMHjX3KKLO4dOKz4czsgoto4ZBg7LBRRQ4LmU7hzam1eqDVpEje9cPGQUADUvl-rSRJTswjYOQ5XdZGQVTIJRrVITHs8YIPgBzFP5MyOIF2lfApU6738VGXalsIS9YI6F2xcvwaiCn0QwpPbmEYwU1UC1bOLoARgtL0u1-tCBNJqRTk0krRXFClYDPjIjiGX1JkLTJ0VAAm2JANudl7J8ikrHiBxAriLrsKKzv2Fo3d3O6wDpZ3vUgzeVyvee=w592-h400-no[/img] I have tried to paste two grids but does not work. I also tried to draw an irregular grid,but it could not be saved into .grd [img]https://lh3.googleusercontent.com/LZoRzBoP7r6qg9SLILB3simzXgGBaECI9ezzujKvcd9SWyZ4jupv7qllZT8Mo1MoHdkqA-8PMXBlIAp-asoM4Yu1uLkr5YJEYaVhk7vMoBbh92r_yQX2OQYyKJgEusdP-6s7PAbS6uvtkhbWO1p9iyJOceeikUOG6rwU7XTY8kWranOdAk92T0b0C18E-l8XkjDKBmRs6UrgqTiv14hl-iu9_ekl3fB8MKOvWYsaE0CP9KeEIP7UuXyRolMEs817H9nyBseHfELo1Ko2l7HhAsffm9jvxzC3bQXgB3LvlzK4dmt9DiqchrWEE2vWFQzV2GXfNnjd-Btokc-MgA7bSATuCxXVZ_tVCKo-tJf5PAGMhupB-HJTrlhZpE1xoVuCWUsSP2sqlFYA44Gf5MeXpEKsUWayygYQf_Xi8wvCcOovRLBXY2McSvfFNxMhE3dg0JfJq685BKpFt1HROG8uHmIdT_wWFa_5Bb992pCq2SL-yXiZn_kdatTlJs5rsTgnNLpycFOmypCKSMsxuDjbOrGzRa5Kps9K_oJ_1snm9A8jJ0tnILt3H7dZfujih2kcE4DVKTdhigIi8sr8500avia1vBCLkQdbOOiswIvMJcGqI87x=w762-h730-no[/img] Will you have another way or point out my mistakes,please. thanks
    0 Subcategories 2 Threads

  • shild18

    the number of the layers is 100 at most. when i make the number of the layers exceed 100, such as 150, it will apears error, so how can i solve it, the following is the error: ******************************************************************************** *** *** Deltares, FLOW2D3D Version 6.02.13.62541M, Nov 6 2018, 12:53:18 *** built from : https://svn.oss.deltares.nl/repos/delft3d/branches/releases/7545 *** *** runid : JLR_YZR_steady *** date,time : 2019-08-31, 23:08:53 *** ******************************************************************************** *** ERROR Number of layers too large. Contact Deltares *** End of tdatom for model: JLR_YZR_steady *** *** 2019-08-31 23:08:53
    0 Subcategories 0 Threads

  • Teodósio Nzualo

    Dear, My name is Teodósio Nzualo and i'm a pos-doc research in Federal University of Rio de Janeiro. I user the Delft3D since 2010 in free version. In March 1, 2016 i received from Deltares the last License which i'm using. However in March 18, my QUICKPLOT left to work. The mensage that i received is "Error in mclFreeStackTrace". What could it be? Is it a error of compiler R2013? and how to resolve it? I'm using the Delft3D in version 4.01.00.02. 1 - MCR_R2013b_win32_installer 2 - vcredist_x86 (2010 SP1) 3 - delft3d_tutorial_x86 4 - delft3d_binaries_x86 5 - DS_Flex Specifications of my PC Processor: Intel(R)Core(TM) i7 CPU 2.93 GHz Memory RAM: 6.00 GB System type: 64-bit Operating System, x64-based processor And i'm using a Windows 10 Thanks for your attention. Teodósio Nzualo
    0 Subcategories 0 Threads

  • Version and Compiling

    I am trying to use Delft3d version 4.01.01.rc.03. I want to know, for this version of Delft3d, which flow tag should I use? Similarly, if I want to use Delft3d version 4.02.02, which flow tag version should I use. And what is the flow tag version that i should use for Delft3d version 4.00.02? I am trying to compile the source code since last week but there is always some errors and problems. I am using Microsoft visual studio 2010 and intel parallel studio XE 2015. Is there any way i can run Delft3d for simulation without compiling the source code? I would be very much thankful for your support.
    0 Subcategories 1 Thread
20 Entries Per page

Showing 1 to 14 of 14 entries.

Threads
10 Entries Per page

Showing 391 to 400 of 1,401 entries.